TECHNICAL SHEET >>
LOA:
10.10 m / 33.1 ft
LOD:
10.10 m / 33.1 ft
LWL:
8.05 m / 26.4 ft
Beam:
2.66 m / 8.7 ft
Draft (keel of choice):
1.35 m / 4.4 ft
1.85 m / 6.1 ft
Airdraft:
13.27 m / 43.5 ft
Displacement:
3,200 kg / 7,055 lbs
Ballast:
1050 kg / 2,315 lbs
Ballast share:
38% / 38%
Hull material:
Hand layup GRP with thermoformed foamcore
Sail area/Displacement:
25.5
Displacement/LWL:
146.2
Stability index:
193
Naval Architecture:
Dykstra Naval Architects
Interior Design:
Dykstra Naval Architects
Sail area upwind:
46.6 m2 / 513.0 sqft
E:
4.2 m / 44.8 ft
P:
11.5 m / 123.9 ft
I:
12.3 m / 132.2 ft
J:
3.4 m / 36.4 ft
Water:
35ltr 7.4gal
Fuel:
35ltr 7.4gal
Black water:
35 ltr 7.4 gal
Vessel type:
Sloop
Rig type:
Fractional sloop
Mast type:
Deck stepped
ABOUT US >>
The development of the Flyer 33 began in 2009 in the mind of a former world sailing champion, Rutger Mohr. Through his more than 40 years of experience and passion for sailing, he knew exactly which requirements the ideal sailing yacht had to fulfil. It had to be a combination of sheer beauty, superb sailing performance and yet plenty of comfort for a relaxing weekend on the water with family and friends. As this combination proved impossible to find, the idea for the Flyer33 was born.
The exterior and interior design of the Flyer33 is done by Dykstra Naval Architects and the yacht is build by Menken Maritiem.
Hoekse Aarkade 2
2461 ET Ter Aar
The Netherlands
0031-172 - 604 742